Compliance
Driver support and complaints
How to use a charge point, what to do when it goes wrong, and how to escalate a complaint if support has not resolved it.
Helpline verification
Statutory helpline number not yet published
The dedicated free-to-use, 24-hour staffed helpline for public charge points will be published here once the number, staffing and free-to-use arrangement are confirmed. Until then this page does not claim that such a helpline is in place, and the number shown is our office-hours business line.
Starting a session
Park in a marked bay, plug the connector into the vehicle first, then follow the instructions on the charge point screen. Charging begins once the vehicle and the charger have completed their handshake.
If the screen does not respond, or the session does not start, note the charge point reference shown on the unit and the time, and contact support. Do not repeatedly re-plug the connector.
Stopping a session
End the session on the charge point or in the EV Smart app, wait for the unit to confirm it has stopped, then release the connector. If the connector will not release, unlock the vehicle first; if it is still locked, contact support rather than forcing it.
A session left running after you have finished delays the next driver, and at sites with an overstay charge it can cost you money.
Payment options
Depending on the site, you can pay by contactless bank card at the unit, through the EV Smart app, with a registered RFID card where one has been issued, or through a roaming provider where an agreement is live at that site.
The methods accepted at a specific charge point are shown on the unit and in the app. We do not claim that every unit accepts every route.
Charging price information
The price per kWh is shown on the charge point screen and in the app for that site before you confirm a session, together with any additional charge that can apply.
Charging pricing and payment routes are explained in more detail on the pricing page, including why tariffs differ between sites.
Receipts
Contactless sessions produce a receipt from the payment provider for that unit. Sessions started in the app appear in your session history with the energy delivered and the amount charged.
If you need a copy of a receipt, contact support with the date, the site and the charge point reference.
Failed charging sessions
Where a session failed, ended immediately, or delivered no energy, send us the date, the time, the charge point reference and the last four digits of the card used. We check the session record and correct the charge where the record confirms the fault.
If the vehicle stopped accepting charge rather than the equipment failing, that shows in the session data, and we will tell you what the record shows either way.
Refunds and disputed transactions
Refunds are raised against the original payment. Contactless refunds go back to the card used; app refunds go back to the payment method on the account; roaming refunds are handled by the roaming provider that billed you.
If you do not recognise a charge, contact us before raising a chargeback with your card issuer, because a session record normally resolves it faster. If we cannot resolve it, we will tell you plainly so you can escalate it.
Reporting a fault
Faults can be reported by phone or email, using the number or address on this page and on the charge point label. Include the charge point reference, the time, what the screen showed and whether the connector was involved.
Fault reports that include the reference are routed to the team that can take the unit out of service, which is what stops the next driver having the same problem.
Driver support details
EV Smart driver support can be reached on 0330 002 1730 during office hours, and by email at support@ev-smart.co.uk. Commercial enquiries should use info@ev-smart.co.uk instead, so that driver issues are not queued behind sales traffic.
The telephone number above is our general business line, answered by our team during office hours. We are not describing it as the statutory public charging helpline, and we do not claim it is free to call.
Complaints procedure
If something has gone wrong and support has not resolved it, you can complain. Our procedure is:
- Stage 1: contact driver support with the details. Most issues are resolved here, usually by checking the session record.
- Stage 2: if you are not satisfied, ask for the complaint to be escalated to a manager. We will acknowledge it and give you a named contact.
- Stage 3: we will respond in writing with what we found, what we are putting right, and what we cannot do. We aim to complete this within 10 working days of escalation, and will tell you if it will take longer.
We keep a record of complaints and their outcome so that repeat faults and recurring causes are visible to management rather than being handled one session at a time.
Escalation routes
If our final response does not resolve your complaint, we will say so clearly and explain the options available to you, including referring the matter to the relevant consumer body or, where the issue concerns a fault at a specific site, to the site operator or local authority that controls it.
We do not have a mandatory ombudsman scheme for charging disputes, so we will not invent one: if you ask us which route applies to your case, we will tell you what we understand the position to be and point you to the body that can confirm it.
