Compliance
Open EV Charging Data
Public charging infrastructure benefits from accurate, accessible data that helps drivers and third-party services locate charging points and understand their availability.
Publication status
No verified public charging data endpoint is confirmed yet
We are not publishing an endpoint address, a static data file or an availability feed until the data behind it is confirmed to be live, structured to OCPI 2.2.1 and maintained.
Our public network statistics feed publishes aggregate operational figures only. It is not the open charging data feed, and it carries no location, connector, tariff or availability detail.
Outstanding: confirmation from EV Smart management and the charge point management provider
Why open charging data matters
A driver looking for a charger relies on someone else's map, app or in-car system. Those services can only be accurate if operators publish structured data about where their charge points are, what connectors they have, whether they are working and what a session costs.
Accurate open data also benefits the operator: a charger that shows as unavailable when it is working loses revenue, and a charger with the wrong connector listed loses the driver entirely.
OCPI 2.2.1
OCPI is the Open Charge Point Interface, the interchange format used across Europe for exchanging charging data between operators and service providers. Version 2.2.1 is the version the UK regulations point to for public charging data.
In practical terms it defines a consistent way to describe locations, the equipment inside them, connectors, tariffs, payment methods, opening hours and live status, so a third party can consume the data without a bespoke integration.
Public charging locations
Each publicly accessible charging location is described as a single site with an address, coordinates and access information, rather than as a list of isolated units. Sites that are not publicly accessible are not published as public locations.
EVSE and connector information
Each charge point within a location is described separately: its identifier, the standard and format of its connectors, its maximum power, and whether it is currently available. This is what allows a driver to know, before arriving, whether a CCS rapid unit is free rather than a slower AC bay.
Charging availability
Availability needs to reflect the live state of the equipment, including units that are out of service, reserved or occupied. A feed that is updated occasionally rather than in real time is worse than no feed, because drivers come to rely on it.
Tariffs
A published tariff states the price per kWh and any additional charge that can be applied, tied to the specific units it covers. Because our tariffs vary by site and by payment channel, a tariff is published against the location it belongs to, not as one network rate.
Payment options
The payment methods accepted at a location are part of the data set: contactless bank card, app, RFID where issued, and any roaming route that is live. A driver should be able to see whether a card will work before starting a session.
Access and operating hours
Access information covers whether a location is public, restricted to customers of a site, or limited by barrier or opening hours. Getting this wrong sends drivers to chargers they cannot reach.
Availability updates
Real-time status is what separates a directory listing from an open data feed. Updates need to be pushed as equipment state changes, and reconciled periodically against the operator's own management platform so that stale status does not persist.
Data access methods
Access is provided through a documented endpoint with authentication for service providers, in the OCPI structure, so a third party does not have to scrape a website or work from a static export.
The endpoint must be maintained and monitored. A published URL that returns stale data, or an expired token that was never noticed, is a compliance failure in practice even if the page describing it looks correct.
Data enquiries and corrections
If you have found a location, connector, tariff or availability entry that is wrong, tell us at info@ev-smart.co.uk with the site name, the charge point reference and what you observed. We will correct the source record so maps built from our data update as well.
Where the error appears in a third-party app or map, correcting our own feed is still the first step: those services update from it.
What is not published
- Private operational interfaces used between EV Smart and its platform
- Customer records, contracts or billing data
- Delivery partner or supplier information
- Any credential, key or secret
Report wrong data
Send the site, the charge point reference and what you observed. Include a screenshot of the source showing the error if you have one.
info@ev-smart.co.uk